K6 Smart band Operation Manual Thank you for choosing this product, please read the operation manual carefully before use.
Settings Carry out settings via VeryFit app on your iOS or Android phone. Note: The hardware and system requirements are: iOS 9.0 or above Android 6.0 or above 1. Downloading VeryFit app Download and install the "VeryFit" app on the App Store, Google Play or by scanning the QR code below. 2. Product activation and installation Note: Before first time use, make sure to charge the band to activate it: 1) Pull out the band strap and take out the main body.
Your product Product overview Touch button operation: [Press the touch button] (1) to toggle through menus. (2) to wake the screen when it is off. [Long press the touch button] (1) to enter the submenu. (2) to return to the previous menu. How to wear the band Wear the band horizontally on the wrist. The band should rest about 2 cm’ width below the wrist bone, as you would normally wear a watch.
2. Data menu [Press the touch button] to go to the next menu: Heart rate menu. [Long press the touch button for 2 seconds] to enter the submenu of Data menu. [Press the touch button] to go to the next submenu. Note: To return to Data menu, long press the touch button when in submenu of Data menu. 3. Heart rate menu → Measuring heart rate...
Note: Heart rate is measured 1 second after the Heart rate menu is entered. “ is displayed before a heart rate data is detected; when measurement is done, heart rate data is displayed. [Press the touch button] to go to the next menu: Exercise menu. 4. Exercise menu [Long press the touch button for 2 seconds] to enter the submenu of Exercise menu. [Press the touch button] to go to the next submenu of Exercise menu.
[Press the touch button] to go to the next submenu. [Long press the touch button for 2 seconds] to exit the exercise mode. Note: To display riding speed and distance, you need to pair the device with the app, and tap “Start” on the app when you start riding. 4.3 Pause an exercise [Long press the touch button for 2 seconds] to exit the exercise mode. Note: This feature is available only when the exercise is started from the app.
4.5 Data display when an exercise ends Steps/Calories Distance/Average pace Average heart rate/Exercise duration [Press the touch button] to view the next data page; long press the touch button to return to the first submenu of Exercise menu. 4.6 Event reminders in exercise mode 1) Exercise exits when no movement is detected. [Press the touch button] to exit the reminder and return to exercise mode.
2) Exercise is compulsorily exited when memory is full [Press the touch button] to exit the exercise. Note: When the band’s memory is full, the user will be reminded to exit the exercise mode. 3) Exercise is compulsorily exited when battery is low. [Press the touch button] to exit the exercise. Note: During an exercise, when the battery is low, the exercise will be paused and the user will be reminded to exit the exercise mode.
5) Abnormal operation during an exercise [Press the touch button] to exit the reminder. Note: For an exercise started from the app, this reminder will pop up when the Bluetooth connection between the band and the app is disconnected. A reminder will pop up. 5. Stopwatch menu [Long press the touch button for 2 seconds] to enter the Stopwatch menu. 5.1 Start the stopwatch [Press the touch button] to start counting time. [Long press the touch button for 2 seconds] to return to the Stopwatch menu.
5.2 Pause the stopwatch [Press the touch button] to pause. [Long press the touch button for 2 seconds] to return to the Stopwatch menu. 5.3 Restart the stopwatch [Press the touch button] to continue counting time. [Long press the touch button for 2 seconds] to return to the Stopwatch menu. 6. Alarm menu [Press the touch button] to return Time menu. [Long press the touch button for 2 seconds] to turn on/off the alarm. Note: Relevant setting needs to be finished on the app.
7. Reminder menu 1) Call reminder [Press the touch button] to exit the reminder and answer the call. [Long press the touch button for 2 seconds] to hang up. Note: Call reminder has to be turned on on the app. 2) Message reminder On the Message interface, press the touch button to read the whole message. Note: Relevant setting needs to be finished on the app. 3) Alarm reminder Meeting Get up Gathering Dating Sleep Note: Relevant setting needs to be finished on the app.
4) Hydration reminder [Press the touch button] to turn off the reminder. Note: Relevant setting needs to be finished on the app. 5) Reminder to move around [Press the touch button] to turn off the reminder. Note: Relevant setting needs to be finished on the app. 6) Goal achieved reminder When a goal is achieved, the band will vibrate and a goal achieved reminder will be displayed. [Press the touch button] to turn off the reminder.
7) Low battery reminder [Press the touch button] to turn off the reminder. 8) Ultra-low battery reminder The screen will stay on this interface, and the user cannot enter other modes.
IP rating: IP68 Operating temperature: 0-60 ℃ Frequency range: 2402-2480 MHz Screen type: 0.96" color screen Charging voltage: 5V±0.2V Standby time: 6 days Weight: 19.2g Bluetooth version: BLE 4.2 Max. transmission power consumption: 0dBm Care and maintenance Three suggestions for use and maintenance: 1) Keep the product clean. 2) Keep the product dry. 3) Do not wear the product too tight. * Do not use household cleansers when cleaning the product. Use soap-free cleansers instead.
FAQs Why can’t I find the device when pairing? (1) Ensure that your smartphone’s Bluetooth is turned on, and the operating system of your phone is Android 6.0 or above, or iOS 9.0 or above. (2) Ensure that the distance between your phone and the device is less than 0.5 meter when pairing. After pairing is completed, ensure that the device is within normal Bluetooth communication distance (within 7 meters). (3) Ensure that the device has sufficient power.
15
