Datasheet

IDITECH CORPORATION
SPECIFICATION
TITLE SPC. NO.
PAGE： 3 OF 4
MINI DIN JACK
DATE： 2013.04.24
6. Endurance characteristics
6.1 Humidity
The S-Jack and Pin Jack shall be subject to
90﹪〜95﹪RH, 40℃±3℃
for 96 hours, and
shal
l then be conditioned at room ambient
conditions for a period of 1〜2 hours.
Dimensional requirements shall
be satisfied.
Electrical and mechanical
characteristics shall be satisfied.
Pin－Contact：80mΩ MAX.
Plug cover－Socket：
100mΩ MAX.
Insulation resistance:
1MΩ MIN.
6.2 Dry heat
The jack shall be stored at a temperature of
70±3℃ for 96 hours, Then the jack shall be
maintained at standard atmospheric conditions
for 1〜2 hours.
after which measurement shall
be made.
Dimensional requirements shall
be satisfied.
Electrical and mechanical
characteristics shall be satisfied.
Pin－Contact：200mΩ MAX.
Plug cover－Socket：
500mΩ MAX.
Insulation resistance:
10MΩ MIN.
6.3 Operating
endurance
The socket
shall be subject to 1,000 cycles, at
the rate of 10〜20 cycles per minute.
Dimensional requirements shall
be satisfied.
Electrical and mechanical
characteristics shall be satisfied.
Pin－Contact：80mΩ MAX.
Plug cover－Socket：
100mΩ MAX.
S－JACK/001