Installation Guide

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” ©
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
4-1/2” Projection Square Kickdown Stop
Item# 13100
Dimensions:
• Arm Length: 4-1/2”
• Overall Projection: 4-3/4”
• Weight: 9 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
The instructions below are for reference only. Depending on application,
install may vary. Always consult a professional.
1. Engage the kick stop so that the rubber tip would be flat on the
floor and the base would be flat on the door.
2. Position stop near outer edge of door with rubber foot flat on floor.
3. Mark and drill pilot holes.
4. Mount the door stop onto the door with the provided fasteners.
Please hand tighten fasters. Do not use a power driver.
Fasteners are made of brass.
Catalog Section: D
4-1/2” Projection Square Kickdown
Stop
Item# 13100
Date: Rev 06/21