Installation Guide

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” ©
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
24” Surface Bolt with Round Knob
Item# 11282
Dimensions:
• Bullets: 3
• Guides: 4
• Throw: 1”
• Guide Weight: 1 oz
• Knob Weight: 3 oz
• Knob Projection: 1”
• Item Weight: 22 oz
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
The instructions below are for reference only. Depending on application, install may
vary. Always consult a professional.
1. To adjust the tension, adjust the flat head screw on the backside of the bolt.
2. Determine the bolt mounting location. Also determine which type of strike will
be used.
3. Hold the bolt from the edge of the door when retracted. Place the bolt on the
door with the guides in position and use a pencil to mark the hole locations.
4. Drill pilot holes in the locations marked in the previous step.
5. Secure the bolt to the door with the provided mounting hardware. If needed,
mortise location for the strike. Mark and drill pilot holes for the screws.
Mount strike with provided hardware
Catalog Section: B
24” Surface Bolt with Round
Knob
Item#
11282
Date: Rev 08/20