Installation Guide

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” 
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
6” Flush Bolt with Radius End
Item# 11011
Dimensions:
 Face: 3/4” x 6”
 Throw: 1”
 Bolt Diameter: 1/2”
 Weight: 4-3/8 oz.
 Strike: 7/8” x 1-3/4”
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Mark the door by laying the polished face plate
against the door.
2. Mortise/cut door the thickness of the face plate.
3. Mortise clearance for the bolt, making sure to leave
solid wood for the mounting screws.
4. Position bolt on door.
5. Drill pilot holes (soap screw threads) and install.
Catalog Section: A
6” Flush Bolt with Radius End
Item# 11011
Date: Rev 04/18