Instruction Manual

(Example:)Set n003 = 1, n004 = 2, n008 = 0.

Open: Run by frequency reference from multi-function input terminal FR and

run command from multi-function input terminals S1 to S7.

Closed: Run by potentiometer frequency reference and run command from the

digital operator.

• UP/DOWN command (setting: n056 = 034)

With the FWD (REV) run command entered, accel/decel is enabled by inputting the

UP or DOWN signals to multi-function input terminals S6 and S7 without changing

the frequency reference, so that operation can be performed at the desired speed.

When UP/DOWN commands are specified by n056, any function set to n055

becomes disabled; terminal S6 becomes an input terminal for the UP command and

terminal S7 for the DOWN command.

Multi-function Input Terminal

S6 (UP command)

Closed Open Open Closed

Multi-function Input Terminal

S7 (DOWN command)

Open Closed Open Closed

Operation Status Accel Decel Hold Hold