Instruction Manual

101
* Communications error contents are saved until fault reset is input. (Reset is enabled during run.)
Register No. bit Description
02EH
Inverter Status
0 Frequency ref. loss
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 Not used
8 - F Not used
002FH-0030H Reserved
0031H Main circuit DC voltage (1/1V)
0032H Torque monitor
0033H-0034H Not used
0035H Cumulative operation time (I/IH)
0036H Not used
Register No. bit Description
0037H Output power (1/1W : with sign)
0038H
PID feedback value (100% / Input equivalent to max. output frequency; 10/1%; without sign)
0039H PID input value (±100% / ± Max. output frequency ; 10/1%; with sign)
003AH PID output value (±100% / ± Max. output frequency ; 10/1%; with sign)
003BH-003CH Reserved
003DH
Communications error
0 CRC error
1P1 “ON”
2 (Not used)
3 Parity error
4 Overrun error
5 Framing error
6 Timeover
7 (Not used)
003EH-00FFH Reserved