Manual
32
05 REGLO Digital/ISMATEC SA/14.12.02/CB/
Serielle Schnittstelle / Serial interface / Interface sérielle
Befehl Funktion / Beschreibung Beispiel Antwort
Command Function / Description Example Response
Commande Fonction / Description Exemple Réponse
!
Abfrage: Kalibrierte Fließrate ml/min (bei max. Drehzahl = 160/100 min
–1
)* 1!
13
58.3 ml/min
1310
Inquiry: Calibrated flow rate in ml/min (at max. speed = 160/100 rpm)* oder / or / ou**
Interrogation: Débit calibré ml/min (à vitesse max. = 160/100 t/min.)* 600RSV/min
1310
!
_ _ _ _
Eingabe: Kalibrierte Fließrate ml/min (bei max. Drehzahl = 160/100 min
–1
)* 1!0583
13
*
(Die Kommaposition hängt vom programmierten Pumpenkopf und Schlauch ab)
Input: Calibrated flow rate in ml/min (at max. speed = 160/100 rpm)* (The position of the
decimal point depends on the programmed pump-head and tubing)
Saisie: Débit calibré ml/min (à vitesse max. = 160/100 t/min.)* (La position du point décimal
dépend de la tête de pompe et du tube programmés)
[
Abfrage: Anzahl Stellen nach dem Komma (bei max. Fließrate) 1[
13
2
1310
Inquiry: Number of digits after the decimal point (at max.flow rate)
Interrogation: Nombre de décimales après le point décimal (au débit maximal)
+
Abfrage: Pumpenschlauch Innendurchmesser (Antwort 0.00 mm = rpm-Modus) 1+
13
1.6 mm
1310
Inquiry: Pump tubing inner diameter (response 0.00 mm = mode rpm)
Interrogation: Diamètre intérieur du tube de pompe (réponse 0.00 mm =
fonction par tours/min)
+
_ _ _ _
Eingabe: Pumpenschlauch Innendurchmesser (in
1
/
100
mm) 1+0102
13
*
Input: Pump tubing inner diameter (in
1
/
100
mm)
Saisie: Diamètre intérieur du tube de pompe (en
1
/
100
mm)
V
Abfrage: Dosierzeit
1
/
10
Sek. 1V
13
45
1310
Inquiry: Dispensing time
1
/
10
sec.
Interrogation: Temps de dosage
1
/
10
sec.
V
_ _ _ _
Eingabe: Dosierzeit in
1
/
10
Sek. (0000–9999) 1V6000
13
*
Input: Dispensing time in
1
/
10
sec. (0000–9999)
Saisie: Temps de dosage en
1
/
10
sec. (0000–9999)
VM
_ _ _
Eingabe: Dosierzeit in Minuten (000–999) 1VM030
13
*
Input: Dispensing time in minutes (000–999)
Saisie: Temps de dosage en minutes (000–999)
VH
_ _ _
Eingabe: Dosierzeit in Stunden (000–999) 1VH024
13
*
Input: Dispensing time in hours (000–999)
Saisie: Temps de dosage en heures (000–999)
U
Abfrage: Rollenschritte für »MODE DISP • Volume« 1U
13
100
1310
Inquiry: Roller steps for »MODE DISP • Volume«
Interrogation: Pas des galets »MODE DISP • Volume«
U
_ _ _ _
Eingabe: Rollenschritte (0001–65535) für »MODE DISP • Volume« 1U0200
13
*
(Volumen pro Umdrehung = max. Fließrate / 160/100)*
Input: Roller steps (0001–65535) for »MODE DISP • Volume«
(Volume per revolution = max. flow rate / 160/100)*
Saisie: Pas des galets (0001–65535) pour »MODE DISP • Volume«
(Volume par tour = débit maximal / 160/100)*
* 2, bzw. 4-Kanal-Version
* 2 and 4 channel version
* 2, resp. 4 canaux version
** Rollenschritt-Volumen pro Minute, falls die REGLO Digital im rpm-Modus ist (siehe Seite 14 - Schlaucheingabe)
** Roller step volume per minute if pump operates by speed (rpm) see page 14 'Setting the tube size'.
** Volume d'un pas de galet lorsque la pompe fonctionne par tours/min (rpm) (voir p. 14, 'Programmation du Øint. des tubes'