Manual
36
09 REGLO-CPF Digital/ISMATEC SA/24.04.02/CB/GP
Serielle Schnittstelle / Serial interface / Interface sérielle
Befehl Funktion / Beschreibung Beispiel Antwort
Command Function / Description Example Response
Commande Fonction / Description Exemple Réponse
!
Abfrage: Skalenwert für das kalibrierte Hubvolumen 1!
13
4.3 angle units
1310
Inquiry: Value of the flow control ring setting for the calibrated stroke volume
Interrogation: Valeur de l'anneau de réglage pour le volume de course calibré
!
_ _ _ _
Eingabe: Kalibrierte Fließrate ml/min (bei max. Drehzahl = 1800 min
–1
) 1!0583
13
*
(Die Kommaposition hängt vom programmierten Pumpenkopf ab)
Input: Calibrated flow rate in ml/min (at max. speed = 1800 rpm) (The position of the
decimal point depends on the programmed pump-head)
Saisie: Débit calibré ml/min (à vitesse max. = 1800 t/min.) (La position du point décimal
dépend de la tête de pompe programmée)
[
Abfrage: Anzahl Stellen nach dem Komma (bei max. Fließrate) 1[
13
2
1310
Inquiry: Number of digits after the decimal point (at max.flow rate)
Interrogation: Nombre de décimales après le point décimal (au débit maximal)
)
Abfrage: Pumpenkopf-Identifikation: max. Hubvolumen des montierten Kopfes in µl1)
13
25
1310
Inquiry: Pump-head identification: max. stroke volume of the mounted pump-head in µl
Interrogation: Identification de la tête de pompe: volume de course max. de la tête de pompe en µl
)
_ _ _ _
Eingabe: Pumpenkopf-Identifikation: max. Hubvolumen des montierten Kopfes in µl 1)0050
13
*
Input: Pump-head identification: max. stroke volume of the mounted pump-head in µl
Saisie: Identification de la tête de pompe: volume de course max. de la tête de pompe en µl
+
Abfrage: Eingestelltes Hubvolumen in µl1+
13
10
1310
Inquiry: Entered stroke volume in µl
Interrogation: Volume de course en µl sélectionné
+
_ _ _ _
Eingabe: Hubvolumen in µl (00.00 – max.Hubvolumen) 1+0100
13
*
Input: Stroke volume in µl (00.00– max.stroke volume)
Saisie: Volume de course en µl (00.00 – volume de course max.)
V
Abfrage: Dosierzeit
1
/
10
Sek. 1V
13
45
1310
Inquiry: Dispensing time
1
/
10
sec.
Interrogation: Temps de dosage
1
/
10
sec.
V
_ _ _ _
Eingabe: Dosierzeit in
1
/
10
Sek. (0000–9999) 1V6000
13
*
Input: Dispensing time in
1
/
10
sec. (0000–9999)
Saisie: Temps de dosage en
1
/
10
sec. (0000–9999)
VM
_ _ _
Eingabe: Dosierzeit in Minuten (000–999) 1VM030
13
*
Input: Dispensing time in minutes (000–999)
Saisie: Temps de dosage en minutes (000–999)
VH
_ _ _
Eingabe: Dosierzeit in Stunden (000–999) 1VH024
13
*
Input: Dispensing time in hours (000–999)
Saisie: Temps de dosage en heures (000–999)