Manual
IPC/IPC-N/Ismatec SA/23.03.07/CB/GP
39
Serielle Schnittstelle / Serial interface / Interface sérielle
Befehl Funktion / Beschreibung Beispiel Antwort
Command Function / Description Example Response
Commande Fonction / Description Exemple Réponse
%
_ _ _ _
Eingabe: Rollenrückschritte (0-100) 1%0003
13
*
Input: Roller back-steps (0-100)
Saisie: Pas arrière de galet (0-100)
S Abfrage: Drehzahl in % der Maximaldrehzahl 1S
13
53.2
1310
Inquiry: Speed in % of the max. rotation speed
Interrogation: Nombre de tours en % du nombre de tours max.
S
_ __ _(_)
Eingabe: Drehzahl in % der Maximaldrehzahl für 60.3 % = 1S00603
13
*
Input: Speed in % of the max. rotation speed for 60.3 % = 1S00603
13
*
Saisie: Nombre de tours en % du nombre de tours max. pour 60.3 % = 1S00603
13
*
?
Abfrage: Default Fließrate ml/min bei max. Drehzahl = 45.0, IPC /11.25, IPC-N min
–1
1?
13
23.9 ml/min
1310
des programmierten Pumpenkopfes und Schlauches
Inquiry: Default flow rate of the programmed pump-head and tubing
in ml/min at max. speed = 45.0, IPC /11.25, IPC-N rpm
Interrogation: Débit par défaut ml/min (à vitesse max. = 45.0, IPC /11.25, IPC-N t/min.
de la tête de pompe et du tube programmés
!
Abfrage: Kalibrierte Fließrate ml/min (bei max. Drehzahl = 45.0, IPC /11.25, IPC-N min
–1
1!
13
25.3 ml/min
1310
Inquiry: Calibrated flow rate in ml/min (at max. speed = 45.0, IPC /11.25, IPC-N rpm
Interrogation: Débit calibré ml/min (à vitesse max. = 45.0, IPC /11.25, IPC-N t/min.
!_ _ _ _ Eingabe: Kalibrierte Fließrate ml/min (bei max. Drehzahl = 45.0, IPC /11.25, IPC-N min
–1
) 1!2503
13
*
(Die Kommaposition hängt vom programmierten Schlauch ab)
Input: Calibrated flow rate in ml/min (at max. speed = 45.0, IPC /11.25, IPC-N rpm) (The position of the
decimal point depends on the programmed tubing)
Saisie: Débit calibré ml/min (à vitesse max. = 45.0, IPC /11.25, IPC-N t/min.) (La position du point décimal
dépend du tube programmés)
[
Abfrage: Anzahl Stellen nach dem Komma (bei max. Fließrate) 1[
13
2
1310
Inquiry: Number of digits after the decimal point (at max.flow rate)
Interrogation: Nombre de décimales après le point décimal (au débit maximal)
V Abfrage: Dosierzeit
1
/10 Sek. 1V
13
45
1310
Inquiry: Dispensing time
1
/10 sec.
Interrogation: Temps de dosage
1
/10 sec.
V
_ _ _ _
Eingabe: Dosierzeit in
1
/10 Sek. (0000–9999) 1V6000
13
*
Input: Dispensing time in
1
/10 sec. (0000–9999)
Saisie: Temps de dosage en
1
/10 sec. (0000–9999)
VM_ _ _ Eingabe: Dosierzeit in Minuten (000–999) 1VM030
13
*
Input: Dispensing time in minutes (000–999)
Saisie: Temps de dosage en minutes (000–999)
VH
_ _ _
Eingabe: Dosierzeit in Stunden (000–999) 1VH024
13
*
Input: Dispensing time in hours (000–999)
Saisie: Temps de dosage en heures (000–999)
U
Abfrage: Rollenschritte für »MODE DISP Volume« 1U
13
100
1310
Inquiry: Roller steps for »MODE DISP Volume«
Interrogation: Pas de galet pour »MODE DISP Volume«
U
_ _ _ _ (_)
Eingabe: Rollenschritte (0000–65535) für »MODE DISP Volume« 1U0200
13
*
Input: Roller steps (0000–65535) for »MODE DISP Volume«
Saisie: Pas de galet (0000-65535) pour »MODE DISP Volume«