iDevices® OUTDOOR SWITCH User Manual
iDevices® Outdoor Switch Table of Contents In the Box ....................................................................................................................... 3 System Requirements ................................................................................................... 3 Getting Started .............................................................................................................. 3 Unit Mounting .....................................................................
iDevices® 1. Outdoor Switch In the Box Inside your Switch box, you will find: • (1) iDevices® Outdoor Switch • (1) Quick Start Guide • (1) Mounting Screw 2. System Requirements • • • • • • • 3. iPhone®4s and later iPad® 3rd generation and later iPad mini ™ and later iPod touch® 5th generation and later HomeKit™ requires an iPhone, iPad, or iPod touch with iOS 8.1 or later iDevices® Connected app version 2.0 or higher Wi-Fi® 2.4Ghz 802.
iDevices® Outdoor Switch • This Outdoor Switch must be installed in a way to provide a separation distance of at least 20 cm to all persons Figure 1 v1.
iDevices® Outdoor Switch 3.2 Unit Set Up • • • • • • Once plugged in, the Switch will blink blue indicating it is ready to pair o Slow Blue blinking indicates the unit has expired pairing mode o To reinitiate pairing, hold the button down for 5 seconds o Unit will blink blue faster, indicating it is ready to pair An accessory (lamp, fan, etc) can be plugged in at any time Clicking the button on the side of the unit will manually turn the Switch on or off.
iDevices® Outdoor Switch Switch and it's capabilities, please visit our support site at idevicesinc.com/support, or give us a call Monday-Friday from 8am-8pm EST. 4.1 Factory Reset To reset the unit to its factory condition, hold down the button for 10 seconds, the unit will flash red and the button can be released. The LED will then flash white, and then restart the pairing sequence with a fast blue blink. 4.
iDevices® Lockout Factory Reset Identify Normal Operation 5. Outdoor Switch (i.e. link is down) the LEDs slow flash orange until the link is up. When the accessory has detected 100 failed pair-setup attempts it enters lockout mode. The LEDs slow flash red until the accessory is factory reset. When the accessory is factory reset it fast flashes red for about a second and then reboots.
iDevices® Outdoor Switch FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
iDevices® Outdoor Switch (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s).
