User's Manual

2.2 Power On & Off
To power on the iShower
2
:
• Press and hold the power button for 2 seconds until the display reads
“HI”. You will see the iShower
2
logo blinking.
To power off the iShower
2
:
• Press and hold the power button until the display reads “BYE”.
2.3 Pairing
To Pair your iShower
2
to your iPhone, iPad, iPod touch or Android device for
the first time follow these steps:
• Go to your device settings and turn Bluetooth on. For specific questions
on how to pair with your device, please refer to the manual that comes
with your device.
• Power On the iShower
2
• Hold the Bluetooth/Pair button for 5 seconds on the iShower
2
to enter
Setup Mode. In Set up Mode, the screen will display USE1 Open.
• Press the Play/Pause button to select USE1. The iShower
2
will try to pair
for 30seconds. You are now ready to pair with your device.
• Select iShower
2
in your Bluetooth settings. Your device will now
complete the pair with the iShower
2
.
• Once connection is has been made, the iShower
2
logo will stop blinking
and turn solid.
Note: On iPhone, iPad and iPod touch devices the iShower2 will send a pairing
request that must be accepted by the user. On most Android devices the
iShower
2
will pair once it is tapped on in your Bluetooth settings.
To connect additional iShower
2
users (up to 5) follow these steps:
• Go to your device settings and turn Bluetooth on. For specific questions
on how to pair with your device, please refer to the manual that comes
with your device.
• Power On the iShower
2