User Manual

INSTALLATION

INSTALL ON A WALL

•TomountyourInstantSwitchdirectlyontoawall,rstthoroughly

clean the wall’s surface with isopropyl alcohol to remove any dirt or dust.

• Remove the plastic backing to the Command™ Strip & align the

strip with the recessed area on the back of the Instant Switch.

• Peel off the other side of the plastic backing and ensure that the

 productislevelbeforepressingrmlytothewallfor30seconds.

• Install the magnetic iDevices

faceplate, or a rocker style faceplate

of your choice.