User Manual

Thermostat on the home screen. Tap the ‘Menu’

button in the upper left-hand corner. From

here, you can edit the details of your iDevices

Thermostat, organize it into a ‘Room’ and ‘Zone’,

set schedules and create ‘Scenes’.

Testing Your System

1. Set your iDevices

Thermostat to HEAT

mode. Adjust the temperature set point

above the ambient temperature in the room,

and verify that the heat turns on.

2. Set your iDevices

Thermostat to COOL

mode (if outside temperature is above

50ºF). Adjust the temperature set point

below the ambient temperature in the room,

and verify that the cooling turns on.

3. If your system has dual fuel sources (heat

pump plus electric or fuel-red emergency

Warnings And Safety Information

Do not short across terminals on the gas valve or at

the heating or cooling system control board to test the

thermostat installation. This could damage the thermostat

and void the warranty.

Do not select COOL mode if the outside temperature is

below 50ºF (10ºC). This could damage the cooling system.