User Manual

14
16. Connect the wires to the mounting plate
based on the information you gathered in
the chart on pages 11-12, photos you took
earlier and wiring conguration you noted
for step 15.
17. To prevent electrical shorts and damage to
your iDevices
®
Thermostat or home, ensure
all of the wire connections are secure
and there are no bare wires in contact with
another. Insulate bare wires with electrical
tape as necessary. Push any excess wire back
into the wall cavity.
18. Attach your iDevices
®
Thermostat to the
mounting plate.
19. Turn your power on at the breaker box or
switch that controls your heating/cooling
system.
20. Your iDevices
®
Thermostat will automatically
turn on and display the “Connecting
Thermostat to Network” screen.
Note: The Thermostat will stay in the
connection mode for 30 minutes before
timing out. You can manually enter this mode
from the Settings > Setup > Connect menu.
Connecting To The App And Wi-Fi
®
Network
1. Download and launch the free iDevices
®