User Manual

Light Bar Color Codes

MODE DESCRIPTION

Pairing Mode The accessory is waiting for the handset to congure the accessory’s

Wi-Fi

. The LEDs ash blue.

Pairing The accessory is waiting for the handset to initiate and complete pair

set up through either Wi-Fi

or BLE. The LEDs are solid blue.

Pairing Expired Pairing mode has expired and the accessory is waiting for the user to

press the button for about 3 seconds to reenter pairing mode. The

LEDs slow ash blue.

Pairing Restart To reinitiate the pairing mode, hold the button down for 3 seconds

and the LEDs will rapidly ash blue.

Wi-Fi

Link Up When the accessory joins a Wi-Fi

network, (e.g. the link is up), the

LEDs rapidly ash green for a second.

Wi-Fi

Link Down When the accessory has lost the connection to the Wi-Fi

network,

(e.g. the link is down), the LEDs slow ash orange until the link is up.

Factory Reset To initiate a Soft Factory Reset, which will clear all Wi-Fi

and pairing

information, hold the button down for 10 seconds until the LEDs

rapidly ash red. When the button is released the unit will reboot and

reenter the pairing mode.

Identify When the accessory receives a request to identify itself, it rapidly

ashes purple.

Normal Operation The LEDs are OFF once the unit is set up and operating properly.

Rating Information

UL Rated to UL STD 244A & STD 916

Listing: E470483

Input: 125VAC, 60 Hz

Output: 125VAC, 60 Hz

General Purpose: 1200W (10A)

Rated for rain-tight operation when mounted per Sec 3.

This product is not to be used by children or persons with reduced

physical, sensory or cognitive capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction.