User Manual
Table of Contents In The Box �����������������������������������������������������������������������������3 System Requirements �����������������������������������������������������������3 Getting Started ���������������������������������������������������������������������3 Unit Mounting �����������������������������������������������������������������������3 Unit Set Up ����������������������������������������������������������������������������4 iDevices® Connected App �����������������������������������
In The Box Inside your Outdoor Switch box, you will find: • 1 iDevices® Outdoor Switch • 1 Quick Start Guide • 1 Mounting Screw System Requirements • iPhone® 4S and later • iPad® 3rd generation and later • iPad mini™ and later • iPod touch® 5th generation and later • HomeKit™ requires an iPhone, iPad, or iPod touch with iOS 8.1 or later • Wi-Fi® 2.4GHz 802.11 b/g/n compatible network • • Router Security Settings Supported: WPA, WPA2, or None iDevices® Connected app version 2.
• Plug your Outdoor Switch into a grounded wall outlet and let the unit hang down freely • Note approximate location of hang tab, remove the Outdoor Switch and install the mounting screw, such that the weight of the unit rests on the mounting screw and not the power cord • Plug the Outdoor Switch back into grounded wall outlet and install onto the mounting screw, ensuring the weight of the unit is on the screw and not the power cord • Ensure Outdoor Switch plug receptacles are facing downward • Ref
• 5 GHz networks are not compatible • Download the iDevices® Connected app from the App StoreSM Connecting Your Outdoor Switch • Open the iDevices® Connected app • Available products will be shown at the top of the app •. If you don’t see your device, check to see if the blue setup . indicator on the Outdoor Switch is blinking fast or slow. If . blinking slow, hold button down for 5 seconds, release, and . confirm fast blink.
• Clicking the button on the side of the unit will manually turn the Outdoor Switch on or off Problem Solving The following information covers some of the most common troubleshooting issues with the iDevices® Outdoor Switch. If you’d like more detail about your Outdoor Switch and its capabilities, please visit our support site at idevicesinc.com/Support, or give us a call at 888.313.7019.
Light Bar Color Codes MODE DESCRIPTION Pairing The accessory is waiting for the handset to initiate and complete pair set up through either Wi-Fi® or BLE. The LEDs are solid blue. Pairing Expired Pairing mode has expired and the accessory is waiting for the user to press the button for about 3 seconds to reenter pairing mode. The LEDs slow flash blue. Pairing Mode Pairing Restart The accessory is waiting for the handset to configure the accessory’s Wi-Fi®. The LEDs flash blue.
Children should be supervised and instructed not to play with this product. Regulations Product Information: Manufacturer: iDevices® LLC Model: IDEV0004 FCC ID: 2ABDJ-SWITCH4 IC: 11569A-SWITCH4 Important Safety Instructions: When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. FCC Compliance Statement: This device complies with part 15 of the FCC Rules.
• Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement Caution: This transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
Requires the iDevices® Connected app For warranty information please visit iDevicesinc.com/Warranty Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App store is a service mark of Apple Inc. HomeKit is a trademark of Apple Inc.
