uTrust 5501 F HF – OEM Integration Manual OEM Integration Manual for uTrust 5501 F HF Author Version Date Version: 1.1 Identiv 1.
uTrust 5501 F HF – OEM Integration Manual Document History Version Date 1.0 1.1 Version: 1.
uTrust 5501 F HF – OEM Integration Manual Table of Contents 1 2 3 4 5 Scope of the document ....................................................................................................... 4 Identiv uTrust 5501 F HF module........................................................................................ 4 Host Communication Interface ............................................................................................ 4 Integration Guidelines ...........................................
uTrust 5501 F HF – OEM Integration Manual 1 Scope of the document This manual provides information for OEMs that integrate the uTrust 5501 F HF into their own products. 2 Identiv uTrust 5501 F HF module Identiv uTrust 5501 F HF is an USB based contactless card reader module. The reader connects to host via USB 2.0 Full speed interface. It supports ISO14443 and ISO15693 cards in HF mode.
uTrust 5501 F HF – OEM Integration Manual 7. For FCC Part 15.31 (h) and (k): The integrator (host manufacturer) is responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the module is installer and operating. The module should be transmitted and the evaluation should confirm that the module’s intentional emissions are compliant.
