User's Manual
Table Of Contents
- Manual ISCANT1710690 CGE.pdf
- 1 Safety Instructions
- 2 Revision History of Documentation
- 3 Instruction on Transportation and Shipping of the Antenna
- 4 Maintenance and Cleaning
- 5 Performance Features of the ID ISC.ANT1710/690 Antennas
- 6 Installation and Wiring
- 7 Typical Antenna Configuration (Gate Antenna with two Antennas)
- 8 Installation Gate People Counter ID ISC.ANT.GPC in Antenna No.4 Type B
- 8.1 Installation ID ISC.ANT.GPC-E2
- 8.2 Installation and Connections
- 8.3 Configuration and Test
- 8.3.1 Connecting Several People Counters
- 8.3.2 Configuration and Test in ISO Host Mode or Buffered Read Mode
- 8.3.3 Configuration and Test in Notification Mode
- 8.3.4 Using the Trigger Function of the Gate People Counter
- 8.3.5 Using the Direction Detection of Transponders with the Gate People Counter
- 8.3.6 Detection Area of the Direction Mode
- 9 Reader Configuration in Accordance with National RF Regulations
- 10 Technical Data
- 11 Approvals
- Annex
IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Excellence -A/-B
Installation Gate People
Counter
Page 56 of 56
7
Attention !!
Note: Do not touch the antenna
surface of the Radar module to
avoid damaging the electronic
components and soiling.
8
Connect radar connection cable
with X1 of Radar module.
9
Plug Radar connection
cable onto X11 Sen 1 at GPC and
fix the cable with the cable clip.