User's Manual

i-Q310 ISO 18000-7 Transponder Series
Page 19 of 23
5.1.3.5 BAT power LED
The SET and CST transponders have an LED for battery status as indicated in Fig 5.4. If the battery has
more than a 15% charge remaining the LED will be green. Below this level the battery warning flag is
set in memory, and the LED will illuminate red. The battery LED will be off when the battery charge is
depleted or not installed.
5.2 Configuration
The i-Q310 series transponders are not configured directly. They are configured using the i-PORT M-310
device via the air interface and appropriate software. Please see the FDU and Handheld User’s Guide for
information on how to configure transponders.