User's Manual

i-Q310 ISO 18000-7 Transponder Series
Page 14 of 23
4.3 Mounting the CST transponder
The CST is intended for ISO shipping containers like the one shown below in Fig 4.5.
Figure 4.5 ISO container (typical)
The CST transponder is shown below mounted in various orientations. The ISO door mount opening on
the CST is 55mm (2.17”) shown in Figure 4.6. It must be mounted on the left door with the antenna
outside the container and the sensor body and switch mounted inside the container, shown in Figs 4.8
and 4.9.
The roller switch arm shown in Fig 4.6 and 4.8 should contact the right door to detect a breach or
opening of the door.
Figure 4.6 CST door mount opening