User's Manual

i-Q310 ISO 18000-7 Transponder Series
Page 12 of 23
4 Installation
4.1 SET Mounting Options
The transponders are designed with two mounting holes so they can be firmly mounted onto virtually
any surface. The transponder can be mounted using various methods dependent on the particular
application. Among the common types of mounting are:
• Screws
• Rivets
• Double sided tape
• Wire ties
• Mounting bracket (Fig. 4.1 and 4.2)
• Magnetic mount (Fig. 4.3)
Figure 4.1 The SET mounting bracket
Figure 4.2 Installing the SET transponder into the bracket