User's Manual

i-PORT III User’s Guide
Document ID: UG-i-PORT III NAE -32-
Antenna is
defective
- Do optical check to see if
antenna is defective
Change antenna(s) if
necessary
Tag is out of read
zone
- Hold the test tag in front of
the antenna and check if
antenna is being
recognized (blinks, i.e.
Debug port)
If necessary, adjust the
output power to the
requirements
i-PORT does not
scan on various
antennas
Antennas are not
being triggered
- Check if the antennas in
question are activated and
scan-enabled (see
“Configuration”)
Turn on the desired antennas
No messages on
Port 7090 (Debug
port)
Debug Info has
been turned off
(7090)
- Check if Debug port is
activated (i.e. which data is
being transmitted)
Activate the Debug port
(“Configuration”)
File download
unsuccessful, i.e.
i-PORT does not
accept the file
No connection
with i-PORT
- Check the IP address and
the network cable
Change the IP address if
required or change the
network cable
Internet browser
cannot display
i-PORT web page
Browser is trying
to access Proxy
Server
- Deactivate your Internet
browser’s proxy function