User's Manual

i-PORT III User’s Guide
Document ID: UG-i-PORT III NAE -27-
5.0 Viewing Tags
5.1
i-LINKS Viewer Interface
i-LINKS Viewer is a GUI for viewing tag reads from i-PORT III while running the i-LINKS Agent.
Please refer to the i-LINKS Viewer User Guide for instructions on how to use and setup i-LINKS
Viewer.
5.2
Debug Interface
i-PORT III has a debug interface in which you can view tag reads through a terminal window.
Typical uses for the debug interface is to test the i-PORT functionality without running the i-LINKS
Agent.
Things to Note Prior to Using the Debug Interface
• If the i-PORT is running an Agent make sure to backup your current settings and scripts as
these will be lost when using the debug option.
• In order to connect to the debug port of the i-PORT you must set the Custom Application
switch to OFF.
5.2.1 Viewing Debug Output
Create a Telnet connection to the debug port (Default IP-Address: 192.168.2.244, Port: 7090).
From a command prompt type in “telnet 192.168.2.244 7090”. Debug information showing the
result of each scan will then be displayed on the monitor.
# Tags in List
Tag ID
Field Strength
Antenna 1
Field Strength
Antenna 2
Session Setup
(active)
Read data
(inactive)
Data
(inactive)