User's Manual
Table Of Contents
i-PORT III User’s Guide
Document ID: UG-i-PORT III NAE -15-
3.3 Serial Connection
It is possible to change basic settings such as IP address, passwords, etc. via the serial
interface. To accomplish this, the i-PORT has to be connected via the serial interface to a
PC, (with a null-modem serial cable). Next, start a terminal program (HyperTerminal,
GanTerm, etc.) with the following settings:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Protocol: None