User's Manual

i-PORT III User’s Guide
Document ID: UG-i-PORT III NAE -10-
2.4 Cable Connections and Plug Allocation
OUTPUT
ANT WANT 4ANT 3
ANT 2
ANT 1
RS 232INPUTINPUTSUPPLY
10/100 BASE-T
LNK
ACT
1234
+10..30V +10..30V +10..30V
GND GND IN 2 IN 1 GND IN 4 IN 3
Antenna jacks:
ANT1-4 SMA socket, send and receive antennas
ANT W SMA socket, send antenna ONLY (WakeUp Antenna)
Terminal Block 1:
+10..30V Power Supply (+10-30V DC, min 2A) Supply
GND Power Supply Ground Supply
Terminal Block 2:
+10..30V Power supply for optional inputs (max. 4W) Input
IN1 Sensor 1 Connection Input
IN2 Sensor 2 Connection Input
GND Ground connection for optional inputs Input
Terminal Block 3:
+10..30V Power supply for optional inputs (max. 4W) Input
IN3 Sensor 3 Connection Input
IN4 Sensor 4 Connection Input
GND Ground connection for optional inputs Input
Terminal Block 4:
1 Normally open Output 1 (Relay) Output
COM Ground from Relays 1 and 2 Output
2 Normally open Output 2 (Relay) Output
3 Normally open Output 3 (Relay) Output
COM Ground from Relays 3 and 4 Output
4 Normally open Output 4 (Relay) Output
RS-232 Serial Interface (Male):
RS 232 Male DB-9
Communication Speed: up to 115 kb/s
Ethernet interface (10 and 100 Mbit/s)
10/100 RJ-45 Modular Jack
Communication Speed: up to 100 Mbits/s
SUPPLY
+10..30V
GND
INPUT
+10..30V
GND IN 2 IN 1
INPUT
+10..30V
GND IN 4 IN 3
OUTPUT
1234
RS 232
10/100 BASE-T
LNK
ACT