Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Client: Model: Report No: Standards: Date: Identec Solutions, Inc. i-Q8C 2003095 FCC 15.249/IC RSS-210 June 14, 2003 APPENDIX H: MANUAL Please see the following pages.
i-Q8C ILR Tag User’s Manual IDENTEC SOLUTIONS, Inc. Suite 102, 1860 Dayton Street Kelowna, British Columbia Canada V1Y 7W6 Tel: (250) 860-6567 Fax: (250) 860-6541 www.identecsolutions.
Disclaimer and Limitation of Liability IDENTEC SOLUTIONS, Inc. and its affiliates, subsidiaries, officers, directors, employees and agents provide the information contained in this Manual on an “as-is” basis and do not make any express or implied warranties or representations with respect to such information including, without limitation, warranties as to noninfringement, reliability, fitness for a particular purpose, usefulness, completeness, accuracy or currentness. IDENTEC SOLUTIONS, Inc.
Radio Frequency Compliance Statement IDENTEC SOLUTIONS, Inc. is the responsible party for the compliance of the following device: MODEL: FCC ID: CANADA: i-Q8C O2E-ILR-IQ8C 3538B-IQ8C The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS, Inc. The use of accessories and peripherals, other than those approved by IDENTEC SOLUTIONS, Inc.
Table of Contents 1.0 1.1 1.2 1.3 INTRODUCTION ........................................................................................................................................................ 5 FUNDAMENTALS...........................................................................................................................................................5 SYSTEM OVERVIEW.............................................................................................................................
1.0 Introduction 1.1 Fundamentals IDENTEC SOLUTIONS’ ILR® (Intelligent Long Range®) technology is the next generation of long range RFID (Radio Frequency Identification). The objective is wireless and automated data collection over large distances. 1.
2.0 Configuration The i-Q8C tag interfaces to the device through a standard eight pin automotive connector. Only two of the eight pins are used in any installation. The following diagram provides the pin number and functionality: Pin Number 2 3 4 Function System ground IN-N terminal – This is used is a switch to ground application when the device does not have a battery or alternator signal. IN-P terminal – This is used to record operating hours when connecting the tag to a battery or alternating signal.
4.0 Technical Specifications Performance Read rate Up to 100 tags/s (Identification Code only) Up to 35 tags/s @ 128 bit data reading < 150 ms (single tag) Up to 2,000 tags in the read zone Max. response time Multiple tag handling Communication Read/write range to i-PORTIII Operating frequency Data rate (download to tag) Data rate (upload to reader) Maximum transmission power Certification Up to 30 m (100 ft) (free air) 868 MHz (EC) or 915 MHz (NA) ISM band 115.2 kbits/s 115.2 kbits/s 0.
