User's Manual

i
-
Q3
5
0
Series
www.identecsolutions.com
Eur
ope:
Austria: IDENTEC SOLUTIONS AG, Millennium Park 2, 6890 Lustenau / AUSTRIA Tel: [phone] Fax: [phone]
Germany: IDENTEC SOLUTIONS Deutschland GmbH, Hertzstr. 10, 69469 Weinheim / GERMANY Tel.: [phone] Fax: [phone]
North America:
USA: IDENTEC SOLUTIONS INC., Liberty Plaza II, 5057 Keller Springs Rd. Suite 375, Addison, Texas 75001 Tel: [phone] Fax: [phone]
IDENTEC SOLUTIONS
IDENTEC SOLUTIONS is a leading global
supplier of innovative RFID systems
(Radio Frequency Identification) with
communication ranges of up to 500 m.
With its unique Intelligent Long Range

(ILR

) technology, IDENTEC SOLUTIONS
offers innovative and economical
solutions for automated data gathering,
identification, tracking and localization of
objects.
The product series OIS offers automatic
ID-Systems of different technologies
suitable for the demanding environment
in industry and logistics. OIS tags have
up to 32 kBytes of memory and are heat-
resistant up to 235 °C.
To learn more about how ILR

technology can increase efficiency of
your business, contact IDENTEC
SOLUTIONS or visit our website at
www.identecsolutions.com.
In Austria:
[phone], or
[e-mail]
In Germany:
[phone], or
[e-mail]
In North America:
1-866-402-4211 (toll free), or
[e-mail]
Information in this document is subject to change
without notice and becomes contractual only after
written confirmation by IDENTEC SOLUTIONS.
“IDENTEC SOLUTIONS”, “Intelligent Long Range”,
“ILR”, “i-LINKS”, “i-Q”, “i-D”, i”-B”, “i-CARD”, “i-PORT”,
“Solutions. It’s in our name.”, “Smarten up your
assets.“ and the stylized “i” are trademarks or
registered trademarks of IDENTEC SOLUTIONS, Inc.
and/or IDENTEC SOLUTIONS AG.
Copyright © 2005 by IDENTEC SOLUTIONS.
All rights reserved.
Version 1.0 05/07
This device complies with Part 15 of the FCC Rules
and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Technical Specifications
Performance
Read rate Up to 100 tags/s (Collect Tag Identification Code only)
Communication
Read/write range to i-PORT M350 Up to 500 m (1,650 feet) @ free air
Operating frequency 850 – 928 MHz
Data rate 19,200 – 500,000 kbits/s
Sensitivity -105 dBm, depending on data rate
Maximum transmission power 10 mW, depending on national regulations
Electrical
Power source 1 × AA Lithium batteries (replaceable)
Expected battery life Typical 3 years
Battery monitoring Yes
Data
Data retention > 10 years without power
Write cycles 100,000 writes to a tag
Memory size 32 kBytes
Identification code 48 bits fixed ID (32 bits user ID+ 8 bits tag type + 8 bits
manufacturer ID)
Environmental
Operating temperature –40 to +85 °C (–40 to +185 ºF)
Humidity 10 to 90 % relative humidity at 30 °C (+86 ºF)
Shock 50 G, 3 times DIN IEC 68-2-27
Multiple drops to concrete from 1 m (3 ft)
Vibration
5 G, 20 sine wave cycles, 5 to 150 Hz,
DIN IEC 68-2-6
5 G, noise 5 to 1000 Hz, 30 minutes
DIN IEC 68-2-64
Physical
Dimensions 135 × 50 × 26 mm (5.3 × 1.9 × 1.0 in.)
Enclosure Plastic (ASA/Luran
®
S)
Weight 110 g (3.88 ounces)
Enclosure rating IP 65
WARNING: Changes or modifications not expressly approved by manufacturer could void the user’s authority
to operate the equipment
Contents subject to change without notice.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.