i-Q350T ILR Tag Users Guide IDENTEC SOLUTIONS, Inc. Liberty Plaza II, Suite 375 5057 Keller Springs Rd, Addison, Texas 75001 USA www.identecsolutions.com May2008 ___________________________________________________________________________________ Beyond RFID. www.identecsolutions.
IDENTEC SOLUTIONS, Inc. Disclaimer and Limitation of Liability IDENTEC SOLUTIONS, Inc. and its affiliates, subsidiaries, officers, directors, employees and agents provide the information contained in this Manual on an “as-is” basis and do not make any express or implied warranties or representations with respect to such information including, without limitation, warranties as to noninfringement, reliability, fitness for a particular purpose, usefulness, completeness, accuracy or currentness.
IDENTEC SOLUTIONS, Inc. Radio Frequency Compliance Statement IDENTEC SOLUTIONS, Inc. is the responsible party for the compliance of the following device: MODEL: i-Q350T / i-B350T TYPE: HH/NA FCC ID: O2E-ILR-IQ350THH CANADA: 3538B-IQ350THH The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS, Inc. The use of accessories and peripherals, other than those approved by IDENTEC SOLUTIONS, Inc.
IDENTEC SOLUTIONS, Inc. Table of Contents 1.0 INTRODUCTION.................................................................................................................................. 5 1.1 FUNDAMENTALS ....................................................................................................................................... 5 1.2 SYSTEM OVERVIEW .................................................................................................................................. 5 1.
IDENTEC SOLUTIONS, Inc. 1.0 Introduction 1.1 Fundamentals IDENTEC SOLUTIONS’ ILR® (Intelligent Long Range®) technology is the next generation of long range RFID (Radio Frequency Identification). The objective is wireless and automated data collection over large distances. 1.
IDENTEC SOLUTIONS, Inc. 2.0 Configuration The i-Q350T tag requires no special configuration. Options are configured at the factory. It is controlled by commands from the ILR Interrogation device. 3.0 Mounting the Tag. The tag is designed with two mounting holes so it can be firmly mounted onto virtually any surface. It can be mounted using various methods dependent on the particular application.
IDENTEC SOLUTIONS, Inc. 5.0 Technical contacts: In North America: IDENTEC SOLUTIONS Inc. Liberty Plaza II 5057 Keller Springs Road Suite 375 Addison, TX, USA 75001 Tel: (972) 535-4144 Fax: (469) 424-0404 In Europe: IDENTEC SOLUTIONS AG Millennium Park 2 A-6890 Lustenau Austria Tel: +43 (0)5577 87387-0 Fax: +43 (0)5577 87387-15 ___________________________________________________________________________________ Visibility Delivered. Page 7 of 7 www.identecsolutions.
