User's Manual

i-Q350LX GPS -SAT
USER MANUAL
VISIBILITY DELIVERED. PAGE 23 OF 31
3. INITIAL OPERATION, CONFIGURATION OF THE TAG
3.1. General
Important Note
Do not open the housing! Configuration is done using the built-in air interface of the i-Q350TLX FL.
The Response mode of the i-Q350L GPS -SAT offers the following features for configuration:
• Broadcast mode can be configured for simultaneous operation. In this case the tag responds to
commands from a reader as well as broadcasts configurable data in a regular interval.
Tools Needed
• PC running on MS Windows with the Tag Configuration for SSP 350 series tags
• Connection to an i-PORT M 350 or i-CARD CF 350 to communicate with the tags
Overview on the Configuration Software
Select Ping Rate and Ping
Message Content in the block
“Broadcast”
Select Number of bursts
(new loop) in the block
“Marker”
GPS Settings
Satellite Settings