User's Manual

i-Q350LX GPS -SAT
USER MANUAL
VISIBILITY DELIVERED. PAGE 21 OF 31
1.4 Screws
Important Information
1. Tag shall only be mounted on flat and smooth surface. Warped and uneven surface can lead to
damages and to water ingress.
2. Mounting holes must not exceed a diameter of 6.5mm.
3. Only screws with cylindrical Allen heads are suitable for mounting the tag. We do not recommend
using countersunk screws or screws with hexagon heads.
4. Secure the screws with self-locking nuts, spring washers or Nord-lock washers. Self-cutting tapping
screws can become loose over time and should be checked regularly.
5. If the tag is mounted outdoors or in a damp environment, all mounting parts need to be made of
stainless steel or other non-rusting material.
6. A temperature of at least +10 °C (+50 °F) must be maintained during mounting to prevent the casing
from cracking.
7. Recommended maximum torque (for screws with property class 8.8)
M6/#14: 6.0 Nm
8. If the torque is any greater, the screw may over-tighten or the housing can be damaged.
9. Metal surfaces in direct proximity to the tag may reduce the tag’s range of function. Tags should not
be mounted in metal recesses or corners.
10. After mounting, the tag’s function should be tested with appropriate devices and software.