User's Manual

i-Q350LX GPS -SAT
USER MANUAL
VISIBILITY DELIVERED. PAGE 10 OF 31
1. PREFACE
1.1. Preparations
This installation manual must be read carefully prior to starting the installation. The described installation
works assume that installation materials like cable, antenna and data sensor holder, etc. are available.
1.2. Scope of This Document
This document is the hardware description of the i-Q350. This document is intended only for mechanical and
electrical installation of these central units.
1.3. Responsibility
IDENTEC SOLUTIONS reserves the right to make changes and updates to the content contained herein. It is
the user’s responsibility to contact the service department for any possible changes or updates to operating
and maintenance procedures.
1.4. Updates
Updates will be provided upon request. The information in this document may be subjected to changes
without prior notice.
1.5. Scope of Delivery—Visual Inspection
Check whether delivery is complete and for any damages. If the delivery is not complete or damaged
immediately inform the carrier. The dispatch and service organization of IDENTEC SOLUTIONS should also be
informed to facilitate the repair or exchange of the system.
1.6. Associated Documents
Software description and Programmer’s Guide
• SDK Online Help
• i-SHARE Manual
• Specific sensor manuals