User's Manual

i-Q350L RTLS AS & i-Q350L RTLS AH
USER MANUAL
VISIBILITY DELIVERED. PAGE 4 OF 28
RF Exposure
To satisfy FCC and IC RF Exposure requirements for mobile devices, a separation distance of 20 cm
or more should be maintained between the antenna of this device and persons during operation. To
ensure compliance, operation at closer than this distance is not recommended. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
Pour satisfaire aux exigences FCC et IC concernant l'exposition aux champs RF pour les appareils
mobiles, une distance de séparation de 20 cm ou plus doit être maintenu entre l'antenne de ce
dispositif et les personnes pendant le fonctionnement. Pour assurer la conformité, il est déconseillé
d'utiliser cet équipement à une distance inférieure. Cet émetteur ne doit pas être co-situé ou
fonctionner conjointement avec une autre antenne ou un autre émetteur.
This product contains components that are sensitive to electrostatic discharges. Please observe the
special instructions for their protection. Incorrect handling can damage the unit and cause the
invalidation of the warranty.
Minimum safety precautions against electrostatic discharge:
 Establish earth contact before you touch the unit. (For example, touch the earthing screw on the
unit.) Best practice is to use an antistatic ribbon and earth yourself permanently for the time you
handle the unit.
 Avoid unnecessary contact with the unit connectors and assemblies inside the unit.
 Only open the unit if the operational settings (as described in the manual) expressly requires it.
 Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages
with these tools).
 Do not store unit and components without protective packaging.
 Remove unit and components from the packaging only prior to installation.
These notes are not sufficient to guarantee complete protection from electrostatic
discharges! We recommend the use of suitable protective equipment.