User's Manual

i-Q350L RTLS AS & i-Q350L RTLS AH
USER MANUAL
VISIBILITY DELIVERED. PAGE 18 OF 28
Continuous ranging behavior:
While in motion, the i-Q350L RTLS Transponder will perform ranging using the interval specified in
“alternate ranging interval”. After the Transponder detects that it has stopped moving, it will perform
ranging using the standard ranging interval.
The following figure represents the behavior of the Transponder over time. The ranging is in orange,
while the bursts on RTLS event are in blue. This example shows 3 UHF bursts.
In this mode, the Transponder will broadcast distances measured after the ranging is done. As soon
as the Transponder considers it has stopped moving, it resumes its standard behavior.
On Stop ranging behavior:
The i-Q350L RTLS Transponder will keep its standard ranging interval while moving. As soon as the i-
Q350L RTLS detects that it has stopped moving, it will perform 6 measurements with the interval
specified in the “alternate ranging interval”.
The following figure represents the behavior of the Transponder over time. The ranging is in orange,
while the bursts on RTLS event are in blue. This example shows 3 UHF bursts.
Tag stands still
Tag stands still
Tag is in motion
Ranging
Ranging interval
Alternate ranging
interval
RTLS
Event
Bursts
Ranging interval
Ranging interval
Tag stands still
Tag stands still
Tag is in motion
Ranging interval
Alternate ranging
interval
Ranging
RTLS
Event
Bursts