User's Manual

VISIBILITY DELIVERED. PAGE 10 OF 13
4.1 Ping Rate
Note: These settings can be found in the ILR Tag Configuration software tool in the section ―Broadcast‖
 Active: Activates or de-activates the broadcast function that regularly sends out messages.
 Broadcast Interval: 0 = no broadcast messages are sent, value > 0 = Broadcast interval in seconds. This
can be set in steps of 0.5 sec, from 0.5 sec up to 300 sec.
 Broadcast Message Options: The options in this field depend on the capabilities of the tag. The
subchapter ―Limitations of the User Data Field‖ lists the possible options of this tag type.
 User Data Length: Configure the number of Bytes from the ―User Data‖ that is sent with a broadcast
message. The number starts from Byte 0 (zero). The limits of the User Data length are described at the
end of this chapter.