User's Manual

i-PORT 350/250 USB - BT
USER GUIDE
VISIBILITY DELIVERED. PAGE 18 OF 22
4.6. CONNECT VIA USB
Connecting the Reader via USB switches off the BT module until the USB cable is physically
unplugged. The device will be charged via the USB connection and work on a different COM-port if the
device has been used with Bluetooth before. Windows will detect a new device that is connected
through USB and install the drivers automatically.
2
SensorSMART Tools will connect automatically at start up.
The “Battery status” shown in the device configuration mask has changed to “Charging” which
identifies that the device is connected via USB.
Note: make sure that the correct serial port is selected. This might change when the type of
connection is changed from Bluetooth to USB or vice versa.
2
This is the default behavior of Windows, if you have changed this, you can go to „Devices and
Printers“ and allow the option by right-clicking on the name of your computer and define the “Device
installation settings”