User's Manual

i-PORT M350
Page 3 of 30
Printed in Germany
Radio Frequency Compliance Statement
IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices:
MODEL: i-PORT M350
FCC ID: OO4-ILR-IPORTM350
CANADA: IC: 3538A-IPM350
EUROPE:
The user(s) of these products are cautioned to only use accessories and peripherals approved, in
advance, by IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by
IDENTEC SOLUTIONS, or unauthorized changes to approved products, may void the compliance of these
products and may result in the loss of the user(s) authority to operate the equipment.
Operation is subject to the following conditions: (1) these devices may not cause harmful interference,
and (2) these devices must accept any interference, including interference that may cause undesired
operation of the device.
European Notification according R&TTE Directive
This equipment complies to Art. 6.4 of R&TTE Directive (1999/5/EC). It is tested for compliance with the
following standards:
EN 300 220-1 V1.3.1 (2000-09), EN 300 220-3 V1.3.1 (2000-09), ETSI EN 301 489 V1.4.1 (2002-08),
ETSI EN 301 489 V1.4.1 (2002-08)
Professional Installation
Professional installation justification: To qualify for professional installation, the applicant must explain
why the hardware cannot simply be purchased and installed by the average (technically inclined) person.
1) Marketing
The device cannot be sold retail, to the general public or by mail order. It must be sold to dealers.
2) Requires professional installation;
- installation must be controlled
- installed by licensed professionals (EUT sold to dealer who hire installers)
- installation requires special training (special programming, access to keypad, field strength
measurements made)
3) Application
The intended use is generally not for the general public. It is generally for industry/commercial use.