User's Manual

Installation and Hardware Manual
Page 26 of 30
5 Initial Operation
5.1 Configuration
The i-PORT M350 is not configured directly. It is managed via the master unit on the i-BUS, the i-
HUB.
5.2 Important settings—transmit power
Depending on the antenna type these are the maximum transmit power settings:
• Rod antenna: -3 dBm
• A-9185: -8 dBm
• W-900R: -12 dBm
5.3 Checking the Installation
After completing the installation the operation must be systematically checked. The installation check
can be divided into three sections:
• Visual test
• Basic operational check
• Detailed operational check
If the basic check of the operational behavior is to be carried out using a (portable) PC a final check
via the intended user control system should also be carried out.