User's Manual

Installation and Hardware Manual
Page 12 of 30
3.2 Component Overview
i-CAL
i-PORT M350
i-Q350
ILR Gateway
Software
ILR Reader Module
ILR Transponder
i-HUB
ILR System Components
• Tags from the i-Q350 series monitor, record and transmit stored data over large distances. The
high data transmission rate ensures optimal communication.
• Data can be written to or read from the tags by means of the fixed interrogator (i-PORT) and
then transmitted via LAN (or WLAN, PPP, etc.) to a host computer network. Application software
as well as all IDENTEC SOLUTIONS products can be seamlessly integrated into existing software
environments by means of standard interfaces (TCP/IP, FTP, HTTP, etc.)
• Data can also be written to or read from tags by a mobile handheld interrogator. Thanks to the
i-CARD CF, an RFID interrogator in a Compact Flash format, a flexible and adaptable, practically
hardware independent application is created. The i-CARD can be used in third-party handheld
devices from a variety of manufacturers (Symbol, Latschbacher, Teklogix…)
• Handheld readers, based on the Compact Flash i-CARD CF, can also be used to receive
transmissions from the tags over distances up to 30 m. After decoding this data can either be
processed locally or transferred to a network via optional radio cards (WLAN, GPRS).