User's Manual

Installation and Hardware Manual
Page 10 of 30
2 Preface
2.1 Preparations
This installation manual must be read carefully prior to starting the installation. The described
installation works assume that installation materials like cable, antenna and data tag holder etc are
available
2.2 Scope of This Document
This document is the hardware description of the i-PORT M350 to operate i-Q, especially i-Q350
reefer tags. This document is intended only for mechanical and electrical installation of this central
units.
2.3 Responsibility
IDENTEC SOLUTIONS is not responsible for any errors occurring in this document.
2.4 Updates
Updates will be provided on request. The information in this document can be changed without prior
notice and IDENTEC SOLUTIONS are under no obligation.
2.5 Scope of Delivery—Visual Inspection
Check delivery whether it is complete and for any damages. If the delivery is not complete or
damaged immediately inform the carrier. The dispatch and service organization of IDENTEC
SOLUTIONS should also be informed to facilitate the repair or exchange of the system.
2.6 Associated Documents
Hardware description and installation manual (this document)
• Reg-No: IM.0740.EN, i-PORT M350 Hardware and Installation Manual, English
Software description and Programmer’s Guide
• i-CORE Users Guide, English
• Reg-No: IM.0750.EN, i-CAL Users Guide, English