User's Manual

101053

Every time the i-PORT is started the RestoreReg file will be loaded.

This program reads applicable keys from the i-PORT registry and

compares the existing default key values with the values stored in the

“ipsettings” file. Any changes made in the “ipsettings” file will be used

by the system. These changes are stored in the i-PORT RAM and are

updated from the “ipsettings” file anytime the i-PORT is rebooted. If a

new ATA Flash Storage Card is used in the i-PORT the “ipsettings” file

must be updated.

12 i-PORT Antennas

Antennas for use with the i-PORT are required to have a gain equal to

or less than 5dBic. It is recommended that the antenna polarization

should be elliptical or circular, although in applications where the

orientation of the tag is in a consistent and known position linearly

polarized antennas can also be used.

The i-A9185 antenna typically supplied with the i-PORT is an

elliptically polarized patch type antenna, providing a superior radiation

pattern for interior or exterior use.