Reference Manual

113501
16
Note: The internal voltage LEDs will all be illuminated when input
power is applied. There are no LEDs for the auxiliary power outputs.
EXT. BATTERY Indicates the 6V backup battery is being charged.
CHARGING
RSSI Receive Signal Strength Indicator (currently not used).
TRIGGER Displays activity on the BARCODE TRIGGER input.
LCD HEATER Displays heater element on (when equipped).
The right side Annunciator LEDs are organized and labeled in pairs.
For the label “RFID RX / TX”, the RX is the left LED and the TX is the
right LED.
RFID RX Lights whenever the ILR-CARD receives valid RFID
data from tags.
RFID TX Lights whenever the ILR-CARD transmits RFID data
to tags.
HOST RX Lights when i-PORT receives data or commands from
controlling host computer (i.e. via LAN connection).
HOST TX Lights when i-PORT transmits data to controlling host
computer.
TEST RX Shows activity on serial transmit line (RS-232) for
testing.
TEST TX Shows activity on serial receive line (RS-232) for
testing.
BARCODE RX Indicates the input of data from a barcode reader or
other serial input device over the serial terminal (RS-
232 or RS-485).
BARCODE TX Indicates the output of commands to a barcode reader
or other serial device over the serial terminal (RS-232
or RS-485).
INPUT 1 Lights when terminal INPUT 1 is active (shorted to
ground).
INPUT 2 Lights when terminal INPUT 2 is active (shorted to
ground).