User's Manual

i-PORT M 350, i-SAT 300 RTLS, i-PORT M 350 RTLS
Page 9 of 30
2 Mechanical Installation
2.1 Hints
Mounting Kit DIN Rail Clamp Mounting Kit with DIN Rail Clamp
The i-PORT M 350 RTLS is plugged into the mounting kit. Between the mounting kit and the reader
module there is 5 mm space left for the screws.
It is intended to always use the mounting kit. If mounting on a DIN rail is desired, the additional
clamp is mounted on the rear side of the mounting kit.
Use the two mounting holes (diameter 4,5 mm) to attach the mounting kit to a suitable mounting
surface. Once the mounting kit is fixed, plug in the i-PORT M 350 RTLS reader.
Enclosure rating is IP40 without the end cap and IP64 with. If greater enclosure rating is required, the
i-PORT M 350 RTLS must be placed in an additional protective housing, in this situation the end cap
could be removed.