User's Manual

i-PORT M 350, i-SAT 300 RTLS, i-PORT M 350 RTLS
Page 19 of 30
Discover the i-PORT’s Ethernet Interface
• Connect the PC with the i-PORT.
• Start the software “Device Discovery Utility”. This software will automatically detect the Ethernet
device of the i-PORT.
• Select the device listed, then chose “Device Tasks” => “Open Web Interface”.
Now the standard web browser on the PC should start, opening the IP address of the Ethernet device.
In the following login display use this default access codes:
• Default login name: root
• Default login password: dbps
Note
The web interface automatically logs out after a very short time.