User Manual

_________________________________________________________________________
Document #7201-001, Rev C Page 15
3.3 Cable Connections and Plug Allocation
IN 1
+10..30V
GND
+10..30V
IN 2
GND
IN 1
+10..30V
IN 2
GND
INPUTSUPPLY INPUT RS 232 10/100 BASE-T
LNK
ACT
OUTPUT
123 4
ANT 1 ANT 2 ANT 3 ANT 4 ANT W
Antenna jacks:
ANT1-4: SMA sockets, send and receive antennas
ANT W: SMA socket, send antenna ONLY (WakeUp Antenna)
Terminal Block 1: +10-30V Connection for power supply (10-30V DC) Supply
GND Connection for power supply (GND) Supply
Terminal Block 2: +10-30V Power supply for optional inputs (max. 4W) Input
IN1 Connection for Sensor 1 Input
IN2 Connection for Sensor 2 Input
GND Ground connection for optional inputs Input
Terminal Block 3: +10-30V Power supply for optional inputs (max. 4W) Input
IN3 Connection for Sensor 3 Input
IN4 Connection for Sensor 4 Input
GND Ground connection for optional inputs Input
Terminal Block 4: 1 Normally open Output 1 (Relay) Output
COM Ground from Relays 1 and 2 Output
2 Normally open Output 2 (Relay) Output
3 Normally open Output 3 (Relay) Output
COM Ground from Relays 3 and 4 Output
4 Normally open Output 4 (Relay) Output
Serial and Ethernet Interface:
RS 232 interface (up to 115 kb/s) and Ethernet interface (10 / 100 Mbit/s)
GND
+10..30V
SUPPLY
IN 1
+10..30V
IN 2
GND
INPUT
IN 1
+10..30V
IN 2
GND
INPUT
OUTPUT
123 4