User's Manual

This installation manual must be read carefully prior to starting the installation. The described
installation works assume that installation materials like cable, antenna and data sensor holder, etc.
are available.
This document is the hardware description of the i-MARK. This document is intended only for
mechanical and electrical installation of these central units.
IDENTEC SOLUTIONS reserves the right to make changes and updates to the content contained
herein. It is the user’s responsibility to contact the service department for any possible changes or
updates to operating and maintenance procedures.
Updates will be provided upon request. The information in this document may be subjected to
changes without prior notice.
Check whether delivery is complete and for any damages. If the delivery is not complete or damaged
immediately inform the carrier. The dispatch and service organization of IDENTEC SOLUTIONS should
also be informed to facilitate the repair or exchange of the system.
Software description and Programmer’s Guide
 SDK Online Help
 i-SHARE Manual
 Specific sensor manuals