User's Manual

Fixed Reader
The i-PORT M350-2 is a reader for the i-Q350 and i-B350 series of
IDENTEC SOLUTIONS’s Response and Broadcast Sensors. Built into a
compact housing, the i-PORT reads and writes data to the sensors at
distances of up to 500 meters (1640 feet) on two antennas.
Connection to the host system is established via a RS422 interface,
resulting in the capability to connect up to 8 readers in a Daisy Chain
using commercially available CAT 5 cables and connectors.
A simple master/slave protocol enables data exchange. Not only does
the protocol contain the data received from the sensor but it can also
provide information about the time of data reception, field strength
and information about the number of times the sensor has been
received by the reader.
Mobile Reader
The battery powered mobile reader with Bluetooth and
USB interface communicates with a wide spectrum of
handheld devices and tablet computers.
It is ideally suited for mobile applications such as laydown
yards or personnel safety.
With its integrated Bluetooth interface, the mobile reader
can communicate to a wide range of mobile devices
independent from platform or operating system.
The combination of low power components, smart battery
management and the high performance battery allows an
operational time of more than 8 hours. The battery can be
recharged within a very short recharge cycle via USB.
The compact housing with internal antenna is designed to be mounted onto a mobile device or a
tablet computer.
LF: Only LF
boost
enabled tags in mode LF
boost
Mode