Rhein Tech Laboratories, Inc. 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com Client Model Report No Standards Date Identec Solutions, Inc. i-D2 NA 2003025 FCC 15.249/IC RSS-210 March 10, 2003 APPENDIX H: MANUAL Please see the following pages.
i-D2 ILR Tag Operations Manual IDENTEC SOLUTIONS, Inc. Suite 102, 1860 Dayton Street Kelowna, British Columbia Canada V1Y 7W6 Tel: (250) 860-6567 Fax: (250) 860-6541 www.identecsolutions.
Disclaimer and Limitation of Liability IDENTEC SOLUTIONS, Inc. and its affiliates, subsidiaries, officers, directors, employees and agents provide the information contained in this Manual on an “as-is” basis and do not make any express or implied warranties or representations with respect to such information including, without limitation, warranties as to noninfringement, reliability, fitness for a particular purpose, usefulness, completeness, accuracy or currentness. IDENTEC SOLUTIONS, Inc.
Radio Frequency Compliance Statement IDENTEC SOLUTIONS, Inc. is the responsible party for the compliance of the following device: MODEL: TYPE: FCC ID: CANADA: i-D2 IL/NA, IL/NA-H PL/NA, PL/NA-H O2E-ILR-ID2NA 3538(A)-ID2NA The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by IDENTEC SOLUTIONS, Inc. The use of accessories and peripherals, other than those approved by IDENTEC SOLUTIONS, Inc.
Table of Contents 1.0 1.1 1.2 1.3 1.4 INTRODUCTION........................................................................................................................................ 5 FUNDAMENTALS ......................................................................................................................................... 5 SYSTEM OVERVIEW ....................................................................................................................................
1.0 1.1 Introduction Fundamentals IDENTEC SOLUTIONS’ ILR® (Intelligent Long Range®) technology is the next generation of long range RFID (Radio Frequency Identification). The objective is wireless and automated data collection over large distances. 1.
1.4 Features Features Benefits Low cost Tracks large quantities of assets economically using highspeed active technology. 2000-tag simultaneous identification Provides high-speed data collection to facilitate warehousing and inventory-based applications. Wireless triangulation Allows fast, precise location of assets in a warehouse or an inventory yard. 64-byte data memory Stores process information onto the tag to provide real-time tracking and tracing. 100-tags/sec.
2.0 Configuration The i-D2 tag requires no special configuration. Options are configured at the factory. It is controlled by commands from the ILR Interrogation device. 3.0 3.1 Mounting the Tag. Industrial Tag The industrial tag is designed with two mounting holes so it can be firmly mounted onto virtually any surface. It can be mounted using various methods dependent on the particular application.
4.0 Technical Specifications Performance Read rate Max. response time Multiple tag handling Up to 100 tags/s (Identification Code only) Up to 35 tags/s @ 128 bit data reading < 10 ms (single tag) Up to 2,000 tags in the read zone Communication Read/write range to i-PORTIII Up to 6 m (20 ft) (free air) Operating frequency 868 MHz (EC) or 915 MHz (NA) ISM band Data rate (download to tag) 38.4 kbits/s Data rate (upload to reader) 115.2 kbits/s Maximum transmission power 0.
5.0 Technical contacts: In North America: In Europe: IDENTEC SOLUTIONS Inc. IDENTEC SOLUTIONS AG #102 – 1860 Dayton Street Kelowna, BC Canada V1Y 7W6 Millennium Park 2 A-6890 Lustenau Austria Tel: (250) 860-6567 Fax: (250) 860-6541 Tel: +43 (0)5577 87387-0 Fax: +43 (0)5577 87387-15 Document # 7000-0001, Rev.