User's Manual

VISIBILITY DELIVERED. PAGE 15 OF 15
4 Technical Data
Operating Data
Operating frequency ILR-RFID 868 MHz (EU) or 920 MHz (NA), further frequencies on request
Maximum transmission power < 1mW (EU / NA)
Compatibility i-PORT M 350, i-CARD CF-350
Standards/Certification FCC Part 15 (US), ETSI EN 300 220 (EU)
Communication Data Long-Range RFID (ILR, Beacon Technology)
Read range broadcast Up to 500 m (1600 feet) free air*
Operation mode Transmits marker information in at regular intervals
Repetition rate (ping rate) 0,5 – 300 seconds, adjustable in steps of 0,5 seconds
Data rate broadcast 115.2 kbits/s
* The communication range depends on the antenna type, the antenna cable runs and the
environmental conditions.
Communication Data Inductive Loop (Marker)
Read range Up to several meters
Operating frequency 125 kHz (world-wide approved)
Operation mode Receives marker ID number and transmits marker information several
times
Electrical
Power source Lithium battery, non replaceable
Battery monitoring Yes
Data
Data retention >10 years without power
Write cycles 100,000 writes to a tag
Memory size 10,000 Bytes user definable
Identification code 48 bit fixed ID
Environmental Conditions
Operating temperature –40 °C to +85 °C (–40 ºF to +185 ºF)
Humidity 10 % to 95 % relative humidity @ 30 °C
Shock 50 G, 3 times DIN IEC 68-2-27
Multiple drops to concrete from 1 m (3 ft)
Vibration 3 G, 20 sine wave cycles, 5 Hz to 150 Hz, DIN IEC 68-2-6
5 G, noise 5 Hz to 1000 Hz, 30 minutes, DIN IEC 68-2-64
Physical
Dimensions 137 × 37.5 × 26.5 mm (5.4 × 1.48 × 1.04 in.)
Enclosure Plastic
Weight 50 g (1.75 ounces)
Enclosure rating IP 65