User's Manual

i-B2 S – User’s Guide
Version 1.0 03.08.2006 Page 7/12
Appendix A: Technical Specifications
Performance
Read range to i-PORT R2 Up to 100 m (300 ft) (free air)
Read range to i-CARD R2 Up to 100 m (300 ft) (free air)
Operating frequency 868 MHz (EC) or 915 MHz (NA)
Operation Transmits in regular intervals a pre-programmed data string
Repetition rate (ping rate) 0.5 – 60 seconds in 0.5 second steps
Transmit power <1 mW
Certification CE (EN 300 220-1, -3; ETSI EN 301 489-1, -3),
FCC part 15 (US), Industry Canada  pending
Electrical
Power source Lithium battery (not replaceable)
Expected battery life See table
Data
Programmability One time
Programming and activation Wireless by proximity device over a distance of maximum 5 cm
Reprogrammable Yes
Deactivation Yes
Lockable Yes
Memory capacity 4 bytes ID + 9 bytes user data
Environmental
Operating temperature -30°C to +70°C (-22ºF to +158ºF)
*1
-50°C to +85°C (-58°F to +185°F)
*1
Shock 50 G, 3 times DIN IEC 68-2-27
Multiple drops to concrete from 1 m (3 ft)
Vibration 3 G, 20 sine wave cycles, 5 Hz to 150 Hz,
DIN IEC 68-2-6
5 G, noise 5 Hz to 1000 Hz, 30 minutes
DIN IEC 68-2-64
Physical
Dimensions 131 mm x 28 mm x 21 mm (5.2 in. x 1.1 in. x 0.85 in.)
Case Material Plastic (Luran
®
S)
Mass 50 grams (1.75 ounces)
Enclosure rating IP 65 — Protected against dust and low-pressure jets of water
Colour dark blue
*1: Depending on battery type